Installing a portable air conditioner is easy, but problems can arise if you fail to observe the setup procedure correctly. Reach out to professional electricians at gregghumeelectrical.com.au for top quality service and prompt responses, they follow proper safety protocols during installation that minimize the chances of injury or death. Check out what to consider when hiring someone to install a sliding window portable air conditioner.
Gather all the required materials.
Before you begin, you must have an AC unit and a window kit. You also need materials to secure ducts and pipes such as screws or duct tape.
Depending on your window setup, you may need a simple screwdriver or drill and some fasteners. Some models and brands of sliding windows may require additional accessories, but these are the main ones that need to be present.
Identify the location.
When determining the location, consider these factors:
Space: The space allocated for the AC should be sufficient for its width. There should be extra space to prevent kinking of the hose attached to the AC. If the space is too tight or too low air will not circulate well throughout the room.
Distance between window and outlet: The installer must connect the cable or hose to the AC unit. The best place to keep it is near a window and an outlet. The distance between the window and the outlet should be equal or balanced.
Window height: Most portable air conditioners have a height of 3-4 feet.
Also consider the height of your sliding window, as it should not be too high for the hose. If it is too high, the hose will come loose, or it may fail to reach the window which could damage the AC unit.
Fix the cut cover.
Most window kits have three window plates with a hole for the exhaust hose. Fix the cut cover well in the hole. Some portable ACs have threaded covers on the end of the exhaust hose. Use screws to fix the cover in place.
Arrange the window plates.
Slide the plates through your sliding window. The window should be open while doing this. You can install one or several depending on your windows setup. The hollow or grooved part of the hole should be facing outwards and not towards you.
After setting the plates, close the window and confirm that it is in contact with the board to stay in place. If you see a gap for a good fit, use duct tape or screw it in place.
Join the connector and hose.
Attach the connector to the exhaust hose and seal it with a screw. Connect the sealed side to the back end of your AC unit. Turn it on or turn it clockwise until it stops firmly.
Test your unit.
Testing the unit helps you identify where to make some adjustments. Plug your unit into an outlet and check for any leaks as they could result in an electrical problem.
Use duct tape to fix the leak. Or check the hose or drain connection and adjust if it is loose.
Follow safety precautions when installing a portable air conditioner.
Read the manual
Portable air conditioners come with instructions to help installers perform the setup process well. The manual also shares information to promote the safety of installers.
Also Read:Top Tips to Keep Your Tyres In Great Condition
The installer must have an assistant.
A portable air conditioner can be heavy. A person can bear the weight sometimes, but it can lead to accidents. Hiring someone to help can reduce the chances of any mishaps occurring during the setup process.
Do not use extension cards.
Use a standard electrical cord to power your portable air conditioner. Power cords increase the risk of short-outs due to different wattage limits. If the wall socket is far from the portable air conditioner, use an additional line.
Choose the best air conditioner installation service.
Find an air conditioner installation company that is committed to getting the job done efficiently and on schedule. Prefer a company that offers installation, repair, maintenance and after sales services. They should also offer 24/7 services to ensure that you can always rely on them.
